Heavy Duty Multi- Solenoid Valve      ONE UNIT (Filter, Regulator, Lubricator)

CYLINDERS – bore of 6 to 200 mm

Pneumatic Components, Actuators, Valves, FRL Units and FittingsMetal Work Pneumatic was founded in 1967 and has grown to a position as market leader for the manufacture of pneumatic components for automation systems.Metal Work Pneumatic offers a full line of inch and metric pneumatic components, valves, cylinders, fittings, and Filter-Regulator-Lubricators.

Approvals

In 1992 Metal Work  obtained the ISO 9001 certification for quality management. In 2000 they added the one related to the  environmental management according the ISO 14001.To these METAL WORK S.p.A. applied the OHSAS 18001 standard in 2007 to  guarantee a Management System of Occupational Safety and Health. All the certifications above have been released by  the German certification body DEKRA ITS, accredited by TGA. Please call for pricing. 2 week delivery of most units.

HEAVY DUTY MACHINE GUARDING

Gantry Systems & Robotic Cells Safety Guarding with Light Curtains

Line Shaft Couplings, Servo insert mis- alignment Couplings, Bellows type Couplings, Torque Limiters.

http://www.rw-america.com/catalogs_downloads/catalogs_pdf/

Firetrace videos:

http://www.youtube.com/watch?v=ccDPd4ElGq0

http://www.youtube.com/watch?v=TPTcC2o9v3M  (EDM Machine)http://www.firetrace.com/english/video/

INDIRECT SYSTEM  ( click on the picture)

DIRECT SYSTEM (click on the picture)

Firetrace systems  detect and suppress fire, directly at the source, quickly, efficiently and  automatically. Firetrace is a unique, cost-effective, extremely reliable automatic fire suppression system that can be utilized virtually anywhere that a fire poses a risk. The Firetrace system offers complete installation flexibility due to its stand alone design and operation. No additional electrical or plumbing connections are required for operation,  making Firetrace ideal for new construction, retro-fitting, machine tools, control cabinets, fume hoods or mobile applications.Firetrace extinguishes
fire directly at its source using a unique pressurized flexi-tube delivery
system that allows installation virtually anywhere fire protection is required.
This tubing is leak-resistant, flexible, and temperature sensitive. Because Firetrace is a self-contained, stand-alone system, its operation is not affected by power, or water main
failures. Firetrace reacts reliably every time. For applications requiring large area coverage, Firetrace offers a bigger volume delivery system where pressure
nozzles are used to provide rapid protection.

ADVANTAGES

Firetrace offers many
advantages over conventional fire suppressing systems:

• Flexible, narrow tubing enables it to be inserted into small
  narrow spaces
• No electricity required; it will work even in electrical
  failure
• Virtually no installation limitations
• Simple design reduces maintenance
• Always activates at hottest point of the fire
• Suppresses fire in seconds, minimizing damage
• Quick, simple installation
• Extinguishing agent is site-specific, minimizing damage
• Available extinguishant includes water, foam, dry chemical
  or clean gas
• Cost-effective and practical vs other extinguishing systems

Firetrace Brochure – Kasco

Firetrace – Manufacturing and dust extraction

Each ball screw we recondition goes through our step-by-step rebuilding process. Of course, all ball screws are not alike. Each screw receives special attention
where it is needed most. Some ball screws require certain parts replaced rather
than reconditioned. Often, we must custom make parts for ball screws when
replacement parts are not available.

Inspection: Check the ball screw and nut for wear and
damage on the thread radius. Check the ball screw for straightness. Inspect the
ball return system for damage. Check the ball screw for damage on the keyways,
journals, and threads.

Repairs: Make any repairs necessary to the ball screw, nut, returns, and any other worn or damaged parts. Make or replace any parts damaged beyond repair.

• Regrinding & Lapping:
  Regrind (if necessary) and lap the ball screw and nut.
• Cleaning and Refinishing:
  Clean and refinish all parts to like new condition.
• Assembly: Assemble the ball screw
  to the correct preload using high quality chrome steel balls. Install
  wipers and apply lubrication.
• Testing and Final Inspection:
  The ball screw is put through a series of tests and then a final
  inspection to ensure quality, precision, and durability.

http://www.reerusa.com/prodotti.asp?Nov=0&F=22&Ind=7

Janus_A4http://muting.reer.it/

http://www.youtube.com/watch?v=hyT1TD17jxA   (Janus mutinm video)

BALL SCREW END SUPPORTS

http://www.thk.com/us/company/about_thk/movie/index.html      (THK Company video)

THK LINEAR MOTION GUIDES- CAGE BALL & CAGE ROLLER PRODUCTS. PLEASE CALL FOR HELP WITH APPLICATIONS. CALCULATIONS PROVIDED.

http://www.thk.com/us/products/move/index.html      ( link for various motions available)